YASKAWA DX200 User Manual page 98

Description of Units and Circuit Boards
Logical num-
ber
1. This signal can be set as "USE" or "NOT USE" by pseudo input signal "8202x". If "NOT USE" is selected, this
signal can be used as the universal I/O signal described in parentheses.
2. This signal can be select "USE" or "NOT USE" by pseudo input signal "8202x". If "NOT USE" is selected, this
signal can be used as the universal I/O signal described in parentheses.
3. This signal can be allocated to any universal I/O signal at the I/O allocation display in operation condition.
Timer cooling water error validating (
1
or IN09)
GUN Cooling Water Error Validating
2
(or IN10)
Transthermo error validating (or
3
IN11)
-
8 98
Input name / Function
STROKE CHANGE1
SINGLE SOLENOID
DOUBLE SOLENOID
This is a signal, when a double stroke gun is used, to change the open
stroke of the welding gun.
GUN PRESS COMMAND
This outputs gun press command.
7 6 5 4 3 2 1 0
6
0 0 0 1 1 1 1 1
1
2
3
4
5
Low air pressure validating (or IN12)
4
Weld ON/OFF Validating (or OUT09)
5
Pseudo Input Signal 8202x
6