Figure 7-10 Remote Access: Add/Modify Network Ip Address; Table 7-3 Remote Access: Add/Modify Network Ip Address - ZyXEL Communications Vantage RADIUS 50 User Manual

LABEL
Apply
7.6.2 Insert/Modify Allowed Network IP Address
In the REMOTE ACCESS screen, click Add to insert a new entry in the Allowed Network IP Address
list,. To edit an existing entry, click the Modify button next to a Network IP address you want to change.

Figure 7-10 Remote Access: Add/Modify Network IP Address

The following table describes the fields in this screen.

Table 7-3 Remote Access: Add/Modify Network IP Address

LABEL
Allowed Network Address
Network Address
Netmask
Apply
Management
Table 7-2 Remote Access: Add/Modify IP Address
Click this button to save changes back to Vantage RADIUS and return to the
REMOTE ACCESS screen.
Type the first address in your network. This is the start address from which
Vantage RADIUS uses the Netmask to allow access from many IP addresses.
Type the subnet mask used to specify the network range limits for accepted IP
addresses.
Click this button to save changes back to Vantage RADIUS and return to the
REMOTE ACCESS screen.
Vantage RADIUS User's Guide
DESCRIPTION
DESCRIPTION
7-11