Figure 7-8 Remote Access; Table 7-1 Remote Access - ZyXEL Communications Vantage RADIUS 50 User Manual

Vantage RADIUS User's Guide
LABEL
Allowed Access Type
Allow Any IP Address
Allow Specified IP
Address / Network
Address
Idle Time Out
Telnet
7-8

Figure 7-8 Remote Access

Table 7-1 Remote Access

Enable this field to have Vantage RADIUS accept connections from all incoming
IP addresses.
Enable this field to have Vantage RADIUS restricts access to the list of network
addresses and IP addresses in the Allow IP Address and Allowed Network
Address lists.
The default timeout is five minutes for either the console port or telnet/web/FTP
connections. Type the length of time a connection can idle before Vantage
RADIUS disconnects.
Enable this field to allow telnet access to the Vantage RADIUS.
You may change the server port number for a service if needed, however you
must use the same port number in order to use that service for remote
management.
DESCRIPTION
Management