Radius Server Examples - ZyXEL Communications Vantage RADIUS 50 User Manual

Table 5-6 RADIUS Server: Add Allowed Network Address
LABEL
Shared Secret
Description
Apply
5.7

RADIUS Server Examples

The following examples show you how to configure different scenarios for your Vantage RADIUS.
See Section 5.8 for information on wireless client computer account user names. Unless otherwise
specified, a wireless client computer will be referred to as 'computer' in these examples. The RADIUS
server domain name will be referred to as 'realm' name.
5.7.1 Example 1: Vantage RADIUS Local and Remote Server Setup
In the following example A, B and C request access to E. The wireless clients are authenticated by D using
local RADIUS server 1 and remote RADIUS servers 2 and 3. Forwarding authentication requests to
different servers allows wireless clients to be authenticated by a user account specific to each RADIUS
server. The following table displays an example list of user accounts; see the User Account section for
information on how to configure these.
RADIUS Configuration
Type a password as the key to be used.
The key must be the same on Vantage RADIUS as the APs on your network. The
key is not sent over the network.
Type a name to identify your wireless AP network in the Allowed Network
Address list.
Click this button to save changes back to Vantage RADIUS and return to the
RADIUS SERVER screen.
Vantage RADIUS User's Guide
DESCRIPTION
5-15