If you enabled Allow Any IP Address in the preceding RADIUS SERVER screen, you do not need to
configure allowed IP addresses.
Click RADIUS and then RADIUS SERVER in the main menu. Now click the Add button in the Allowed
IP Address section or click Modify next to an entry you want to change. The following screen displays.
LABEL
Allowed IP Address
IP Address
Shared Secret
Description
Apply
RADIUS Configuration
Figure 5-6 RADIUS Server: Add Allowed IP Address
Table 5-5 RADIUS Server: Add Allowed IP Address
Type the IP address in dotted decimal notation of an AP.
Type a password as the key to be used. The shared secret is the WEP Key used
to access an AP on the network.
The key must be the same on Vantage RADIUS and your AP. The key is not sent
over the network.
Type a description for identification purposes of your AP in the Allowed IP
Address list.
Click this button to save changes back to Vantage RADIUS and return to the
RADIUS SERVER screen.
Vantage RADIUS User's Guide
DESCRIPTION
5-13