Figure 5-38 Zyair Radius Settings Example - ZyXEL Communications Vantage RADIUS 50 User Manual

2. Enter the IP
address of the
RADIUS server
in dotted decimal
notation.
5.10.2 ZyAIR G-3000 Wireless Authentication Setup Example
The following example describes how to configure a wireless AP for use with Vantage RADIUS.
To change your ZyAIR's authentication settings, click the WIRELESS link under ADVANCED and then
the 802.1x/WPA tab. Configure your wireless AP to enable authentication through an external
authentication server (Vantage RADIUS).
If your wireless client uses MD5 authentication, either choose static key exchange, or disable dynamic key
exchange.
RADIUS Configuration
1. Enable these fields to activate
authentication and accounting services.

Figure 5-38 ZyAIR RADIUS Settings Example

Vantage RADIUS User's Guide
4. Type a shared secret (password) to secure
communication between the AP and Vantage RADIUS.
3. Type the port number of
the RADIUS server. The
default port numbers are
shown.
You need not change
these values unless you
change them in the
Vantage RADIUS.
5-47