Macintosh Os X - ZyXEL Communications Vantage RADIUS 50 User Manual

Select Ethernet built-in
2.
from the Connect via list.
3. For dynamically assigned settings, select Using DHCP Server from the Configure: list.
4. For statically assigned settings, do the following:
-From the Configure box, select Manually.
-Type your IP address in the IP Address box.
-Type your subnet mask in the Subnet mask box.
-Type the IP address of your Vantage RADIUS in the Router address box.
5. Close the TCP/IP Control Panel.
6. Click Save if prompted, to save changes to your configuration.
7. Turn on your Vantage RADIUS and restart your computer (if prompted).
Check your TCP/IP properties in the TCP/IP Control Panel window.

Macintosh OS X

Setting Up Your Computer's IP Address
Verifying Your Computer's IP Address
Vantage RADIUS User's Guide
D-9