Chapter 7 Management; Remote Management Overview - ZyXEL Communications Vantage RADIUS 50 User Manual

7.1

Remote Management Overview

Remote management allows you to determine which services/protocols can access which Vantage RADIUS
interface (if any) from which computers.
To disable remote management of a service, select Disable in the corresponding field.
You may only have one remote management session running at a time. Vantage RADIUS automatically
disconnects a remote management session of lower priority when another remote management session of
higher priority starts. The priorities for the different types of remote management sessions are as follows.
1. Console port
2. SSH
3. Telnet
4. HTTPS and HTTP
7.1.1 Remote Management Limitations
Remote management will not work when:
1. You have disabled that service in the remote management screen.
2. The client IP address does not correspond to an Allowed IP Address or an Allowed Network
Address. If it does not match, Vantage RADIUS will disconnect the session immediately.
3. There is already another remote management session with an equal or higher priority running. You
may only have one remote management session running at one time.
Management
This chapter details how to configure your Vantage RADIUS for remote access
Vantage RADIUS User's Guide
Chapter 7
Management
7-1