Figure 7-4 Ssh Example 1: Store Host Key - ZyXEL Communications Vantage RADIUS 50 User Manual

7.4.1 Example 1: Microsoft Windows
This section describes how to access Vantage RADIUS using the Secure Shell Client program.
1. Launch the SSH client and specify the connection information (IP address, port number or device
name) for Vantage RADIUS.
2. Configure the SSH client to accept connection using SSH version 1.
3. A window displays prompting you to store the host key in you computer. Click Yes to continue.
4. Enter the password to log in to Vantage RADIUS. The command prompt Vantage> displays next.
7.4.2 Example 2: Linux
This section describes how to access Vantage RADIUS using the OpenSSH client program that comes with
most Linux distributions.
1. Test whether the SSH service is available on Vantage RADIUS.
2. Enter "telnet 192.168.1.1 22" at a terminal prompt and press [ENTER]. The computer
attempts to connect to port 22 on Vantage RADIUS (using the default IP address of 192.168.1.3).
A message displays indicating the SSH protocol version supported by Vantage RADIUS.
Management

Figure 7-4 SSH Example 1: Store Host Key

Vantage RADIUS User's Guide
7-5