Table 3-6 Time Settings - ZyXEL Communications Vantage RADIUS 50 User Manual

Vantage RADIUS User's Guide
LABEL
Current Time
Year/Month/Day
Hour: Minute: Second
Date/Time
Date
Time
Set Date/Time
Get from my PC
NTP Setup
Use NTP (Network
Time Protocol) Time
Server
Server IP/Domain
Name
Time Zone
Sync Time Every
Synchronize Now
3-10

Table 3-6 Time Settings

This field displays the date of your RADIUS.
Each time you reload this page, the RADIUS synchronizes the time with the time
server.
This field displays the time of your RADIUS.
Each time you reload this page, the RADIUS synchronizes the time with the time
server.
This field displays the last updated date from the time server if you have one
configured; otherwise use the drop down list boxes to manually set a date here.
This field displays the last updated time from the time server if you have one
configured; otherwise use the drop down list boxes to manually set a time here.
Click this button to apply the manual date and time configured to the RADIUS
device.
Click this button to have the RADIUS obtain the current time and date from your
computer.
Enable the network time server to have the RADIUS automatically synchronize
the current rime and date with a time server.
Type the address of your time server. Check with your ISP/network
administrator if you are unsure of this information.
Choose the time setting of your location. This will set the time difference
between your time zone and Greenwich Mean Time (GMT).
Type the time in minutes from 10 to 1440 to have the RADIUS synchronize the
time with the time server.
Click this button to get the time and date from the time server you specified
above.
If there is no response from the time server, Vantage RADIUS attempts three
times to connect. If there is no response within approximately ten seconds,
check your time server settings and try again, or click Get from my PC to obtain
the current time from your computer without the time server.
DESCRIPTION
Advanced Settings