Radius Log Messages - ZyXEL Communications Vantage RADIUS 50 User Manual

Vantage RADIUS User's Guide
MESSAGE
Admin login Http OK/Fail : user = admin
source IP
Admin login https OK/Fail : user = admin
source IP
Admin login Telnet OK/Fail : user = admin
source IP
Admin login SSH OK/Fail : user = admin
source IP
Admin login Serial OK/Fail : user = admin
source =console
NTP Time synchronize destination IP
NTP Time synchronize OK/Fail
destination IP
TFTP System/Radius/User Trace log
destination IP
Mail System/Radius/User Trace log
destination IP
4.5

RADIUS Log Messages

Packets sent to Vantage RADIUS from a wireless AP generate RADIUS log messages. For details of
specific log messages sent by your wireless AP, please refer to your wireless AP's user's guide.
Typical log messages sent between Vantage RADIUS and a wireless AP are shown below.
4-4
Table 4-2 System Logs
Someone has logged in to the web configurator using the
administrator account via an HTTP connection.
Someone has logged in to the web configurator using the
administrator account via a telnet connection over a secured
(HTTPS) connection.
Someone has logged in the command interface using the
administrator account via a telnet connection.
Someone has logged in the command interface using the
administrator account via a secured shell connection.
Someone has logged to the command interface using the
administrator account via the console.
An NTP server address was entered into the NTP Server
IP/Domain field on the TIME settings screen, see section
3.12.
Vantage RADIUS has synchronized its time settings with the
NTP server.
This message is generated every time a log file is sent to the
TFTP server.
This message is generated every time a log file is sent via e-
mail.
MEANING
System Logs