Creating Your Own Program; Program Play - Sony LBT-ZX10D Operating Instructions Manual

4
Press ENTER.
Repeat Play starts.
1)
When "SHUFFLE(ALL)" is selected, you cannot
set Repeat Play to "ALL".
2)
When the play mode other than
"CONTINUE(ALBUM)" and
"SHUFFLE(ALBUM)" is selected for MP3 audio
tracks or the play mode other than
"CONTINUE(ALBUM)" is selected for JPEG
image files.
3)
When "CONTINUE(ALBUM)" is selected for MP3
audio tracks and JPEG image files or
"SHUFFLE(ALBUM)" is selected for MP3 audio
tracks.
To cancel Repeat Play
Select "OFF" in step 3.
To turn off the Control Menu
Press DVD DISPLAY repeatedly until the
Control Menu disappears.
Notes
• Depending on the DVD, you cannot perform Repeat
Play.
• You cannot perform Repeat Play during PBC
playback of VIDEO CDs (page 20).
• If you select "ALL", the playback repeats up to five
times.
Tip
You can change the Repeat Play setting when playback
is stopped.
22 GB
Creating your own
program

— Program Play

You can make a program of up to 25 steps in the
order you want them to be played back.
You can synchro record the programmed tracks
onto a tape (page 47).
Using the front panel display
1
Press FUNCTION +/– (or FUNCTION
on the unit) repeatedly until "DVD"
appears in the display.
2
Press PLAY MODE repeatedly when
playback is stopped until "PGM" lights
up in the display.
3
Press DISC SKIP or one of the DISC 1 ~
5 buttons on the unit to select a disc.
To program all the tracks on a disc at once,
proceed to step 5 while "AL" appears in the
display.
To program all the MP3 audio tracks on an
album at once, press ALBUM +/–
repeatedly until the album you want appears
in the display, then proceed to step 5.
4
Press . or > repeatedly until the
track number you want appears in the
display.
When programming an MP3 audio track,
press ALBUM +/– repeatedly to select
album, then press . or > repeatedly
until the track number you want appears in
the display.
Disc tray Selected track
number number
DISC
1
EFFECT
X-GROOVE
PGM
2 3 4 5