Creating A Party Environment - Sony LBT-ZX10D Operating Instructions Manual

Creating a party
environment
You can create a party environment by using
X-ROUND for "moving" sound effect or/and
FLASH for flashing effect.
To enjoy the X-ROUND mode, place your front
and surround speakers at an equal distance from
your listening position (see Example 1 of
"Positioning the speakers" on page 11).
Use the buttons on the unit for the operation.
Moving sound effect
— X-ROUND
1
Press X-ROUND ON/OFF repeatedly
until the X-ROUND indicator lights up.
The last selected X-ROUND mode appears
in the display.
2
Press MODE repeatedly to select the
X-ROUND mode you want.
The display changes cyclically as follows:
MANUAL WAVE t MANUAL FADER
t MANUAL BAL t AUTO WAVE t
AUTO FADER t AUTO BAL t
RANDOM POS t TWISTER
Select
MANUAL
1)
WAVE , AUTO
2)
WAVE
MANUAL
1)
FADER , AUTO
2)
FADER
MANUAL BAL
2)
AUTO BAL
RANDOM POS
TWISTER
1)
You can manually change the sound movement
from one speaker to another speaker by turning
JOG.
2)
You can change the speed of sound movement
by turning JOG.
52 GB
To output sound
In circular motion
From front speakers to
surround speakers
1)
, From left speakers to right
speakers
In random position
In circular motion like
"twister"
To cancel the X-ROUND effect
Press X-ROUND ON/OFF repeatedly until
"X-ROUND OFF" appears in the display. The
X-ROUND indicator turns off.
Notes
• If you cannot get the sound effect you want, check
the speaker connections.
• When the headphones are connected to the PHONES
jack, X-ROUND mode automatically turns off.
• When X-ROUND mode is turned on, the sound field
is automatically changed to "LINK" if the current
sound field is not "LINK" or "LINK SURROUND".
• When X-ROUND mode is selected, you can only
change the sound field between "LINK" and "LINK
SURROUND".
• You cannot turn on X-ROUND mode when
– the headphones are connected.
– the SURROUND setting is set to "NONE"
(page 39).
Flashing sound effect
— FLASH
With the flash function, you can flash the sound
output. The sound cuts off periodically.
Hold down FLASH during playback.
The flashing effect is activated.
To cancel the flashing effect
Release FLASH.
To change the flash speed
Hold down FLASH and turn JOG clockwise or
counterclockwise to change the flash speed
(1 ~ 20).
Tips
• You can activate the X-ROUND and FLASH effect
simultaneously.
• The power illuminator will synchronize with the
selected FLASH effect.