Creating Your Own Program; Program Play - Sony DHC-NXM4D Operating Instructions Manual

Creating your own
program

— Program Play

You can make a program of up to 25 steps.
You can synchro record the programmed tracks
onto a cassette tape (page 43).
Using the front panel display
1
Press FUNCTION + or – repeatedly (or
DVD on the unit) to switch the function
to DVD.
2
Press PLAY MODE repeatedly in stop
mode until "PGM" appears.
3
Press DISC SKIP (or DISC 1 – 5 on the
unit) to select a disc.
To program all the tracks on a disc at once,
proceed to step 5 with "AL" displayed.
4
Press . or > repeatedly until the
desired track number appears.
When programming an MP3, press
ALBUM + or – to select album, then press
. or > repeatedly until the desired
track number appears.
Selected track number
DISC
CD
Disc tray number
5
Press ENTER.
The disc, album or track is programmed.
The program step number appears,
followed by the disc tray number.
"AL", the album number or the track
number appears.
Selected track number
DISC
CD
Disc tray number
20 GB
1 2 3 4 5
PGM A
Step number
1 2 3 4 5
PGM A
6
Program additional discs, albums or
tracks.
To program
Other discs
Other tracks or albums
on the same disc
Other tracks or albums
on other discs
7
Press nN.
Program Play starts.
To clear a programmed step from
the end of a program
Press CLEAR in step 6.
Note
When you switch the play mode to "PGM" while
"REP1" is selected, "REP1" is automatically canceled.
Tip
The program you made remains after Program Play
finishes. To play the same program again, press
FUNCTION + or – repeatedly (or DVD on the unit) to
switch the function to DVD, then press
Using the on-screen display
1
Press FUNCTION + or – repeatedly (or
DVD on the unit) to switch the function
to DVD.
2
Press PLAY MODE repeatedly in stop
mode until "PGM" appears in the
display.
The Program Display appears on the TV
screen.
B
Program
1
2
3
4
5
6
7
8
9
10
B
Repeat steps
3 and 5
4 and 5
3 to 5
nN
.