Turning Off The Display; Power Saving Mode; Changing The Power Illuminator - Sony LBT-ZX10D Operating Instructions Manual

Display

Turning off the display

— Power Saving Mode

The demonstration display and the clock display
can be turned off to minimize the amount of
power consumed during standby mode (Power
Saving Mode).
Press DISPLAY repeatedly while the
system is turned off until the
demonstration display and the clock
display disappears.
To cancel Power Saving Mode
Press DISPLAY repeatedly while the system is
off. Each time you press the button, the display
changes cyclically as follows:
Demonstration display
Power Saving Mode
1)
The display changes and the indicators flashes even
when the system is turned off.
2)
"--.--" appears in the display if you have not set the
clock.
Note
You cannot perform the following operations in Power
Saving Mode.
– setting the clock (page 12)
– changing the AM tuning interval (page 43)
– turning on the system by pressing the following
buttons on the unit.
(a) TUNER/BAND
(b) GAME
(c) h/H (TAPE A)
(d) h/H (TAPE B)
(e) NX (DVD)
– changing DVD power manage setting (page 42)
– switching the VIDEO/SAT function (page 68).
– changing the color system (page 10).
Tips
• The timer continues to operate in Power Saving
Mode.
• The ?/1 indicator lights up even in Power Saving
Mode.
60 GB
1) 2)
t Clock display
Changing the power
illuminator
You can select the power illuminator you want.
Press ILLUMINATION on the unit
repeatedly to select the power illuminator
you want when the system is turned on.
Each time you press the button, the power
illuminator changes cyclically as follows:
PATTERN 1 t PATTERN 2 t PATTERN 3
t PATTERN 4 t PATTERN OFF
When X-ROUND mode is selected
Each time you press the button, the power
illuminator changes as follows:
X-PATTERN* y PATTERN OFF
*
The power illuminator will synchronize with the
selected X-ROUND effect.
t
Notes
• When you press VOLUME +/– (or turn
VOLUME +/– on the unit), the power illuminator
shows the current volume level.
• During the demonstration display, you can turn on or
off the power illuminator by pressing
ILLUMINATION.