Table of Contents
Advertisement
FIGURE 11 : FRONT COVER REMOVAL
HOOK TOP EDGE
OF FASCIA INTO
COVER
APERTURE
ORANGE LED (TOP)
BLUE LED (BOTTOM)
FASCIA
SECURING
SCREW
10.6
The "TEMPERATURE READY" indicator light on the Aquatap heater unit and the
"READY" LED on the dispenser tap will flash. This indicates that the unit is in the self-
commissioning mode. Whilst in this mode, the water will not be hot enough for use. Do
not draw any water off during the self - commissioning mode.
FIGURE 12 : LED POSITIONS (DISPENSER)
SAFETY BUTTON
HOT WATER
BUTTON
READY LED
BOILING WATER
LED
MAIN COVER
COVER
SECURING SCREWS
CHILLED/AMBIENT
WATER BUTTON
TOP COVER
SECURING
SCREWS
17
Advertisement
Table of Contents
