Delay Start; Child Lock (On Certain Models Only) - Electrolux ENV06 Service Manual

4.9 Delay start

The delay start button can be used to delay the start of the
programme from 30 minutes (30') to a maximum of 20
hours (20h) in models with LCD, and to delay the start of
the programme from 3 to 9 hours in models without an
LCD.
Activation
•
Select the programme and any additional functions.
•
Press the Delay start button until the required LED
lights up, or until the delay required is shown on the
display, according to model.
To activate the delayed start, press the START/PAUSE
button, the display will show the time remaining until start
of the programme (e.g. 15h, 14h, 13h, ... 30' and so on).
Deactivation
•
To deactivate delayed start, press the Delay start
button repeatedly until the time reaches zero, or turn
the programme selector dial.

4.10 Child lock (on certain models only)

To prevent a programme from being started or changed by
accident, it is possible to set a child lock.
This function enables all buttons and the programme dial
to be locked.
To enable or disable this function, press the delicate cycle
button and the long anti-crease cycle button
simultaneously, and hold for 5 seconds.
•
Before starting the programme:
the appliance cannot be used.
•
After the programme has started:
the selected programme cannot be changed.
The display shows the symbol indicating that the child lock
has been enabled.
The child lock device does not deactivate at the end of the
programme.
In order to start a new programme, the child lock must first
be deactivated by pressing the buttons once again as
described above.
ADL 2010 / 01 12/57 599 72 63-27