Passing Make Contact - Reer MOSAIC Master M1 Installation And Use Manual

MODULAR SAFETY INTEGRATED CONTROLLER MOSAIC
In the PASSING MAKE CONTACT operator the
output follows the signal on the input.
However, if this is 1 (TRUE) for longer than the
set time, the output changes to 0 (FALSE).
When there is an input falling edge, the timer
is cleared.
Parameters
Time: The delay can be set to between .
Retriggerable: If selected the time is not reset when there is an input falling edge. The
output stays 1 (TRUE) for all the selected time. When there is a new input rising edge, the
timer restart again.
8540780 • 30/03/2016 • Rev.26 121