Brother HL-L8260CDN Online User's Manual page 378

Level 3 Level 4
Wi-Fi Direct Push Button
PIN Code
Manual
Group Owner
Device
Information
Status
Information
I/F Enable
NFC -
Web Connect Proxy Settings
Settings
IPsec -
Network -
Reset
On connection to the network, if the machine's 'Boot Method' is 'Auto' the machine will attempt to set the IP address and Subnet Mask
1
from a boot server such as DHCP. If a boot server cannot be found, an APIPA IP address will be allocated, such as 169. 254. [001-254].
[000-255]. If the 'Boot Method' of the machine is set to 'Static' you must manually enter an IP address from the machine's control panel.
[All Settings] > [Print Reports]
Level 3
Printer Settings
Network Configuration Print the Network Configuration Report.
Print File List
WLAN Report
Drum Dot Print
[All Settings] > [Machine Information]
Level 3 Level 4
Serial No. -
Firmware Version Main Version
Level 5
-
-
-
-
Device Name
SSID
IP Address
Status
Signal
-
-
Proxy Connection -
Address
Port
User Name
Password
-
-
Descriptions
Print the Printer Settings page.
Print a list of data saved in the memory.
Print the wireless LAN connectivity diagnosis result.
Print the Drum Dot Check Sheet.
Descriptions
Display the machine's serial number.
Display the main firmware version.
Level 6 Descriptions
- Configure your Wi-Fi Direct network
settings using the one-button push
method quickly.
- Configure your Wi-Fi Direct network
settings using WPS with a PIN code
quickly.
- Configure your Wi-Fi Direct network
settings manually.
- Set your machine as the Group Owner.
- View your machine's device name.
- Display the Group Owner's SSID.
- Display your machine's IP Address.
- Display the Wi-Fi Direct network status.
- Display the current Wi-Fi Direct network
signal strength.
- Enable or disable the Wi-Fi Direct
connection.
- Turn the NFC function on or off.
Change the web connection settings.
-
-
-
-
- IPsec is an optional security feature of
the IP protocol that provides
authentication and encryption services.
We recommend contacting your
network administrator before changing
this setting.
- Restore all network settings of your
machine to the factory settings.
373