Brother HL-L8260CDN Online User's Manual page 100

If you have not imported a CA certificate into your machine, the machine will display the message [No
Verification].
11. To apply the settings, press a to select [Yes], and then press OK. To cancel, press b to select [No].
12. The machine will attempt to connect to the wireless device you have selected.
If your wireless device is connected successfully, the machine's LCD displays [Connected].
You have completed the wireless network setup. To install drivers and software necessary for operating your
device, insert the Brother installation disc into your computer or go to your model's Downloads page on the
Brother Solutions Center at support.brother.com.
HL-L8360CDW/HL-L9310CDW
Before configuring your machine, we recommend writing down your wireless network settings. You will need
this information before you continue with the configuration.
1. Check and record the current wireless network settings.
Network Name (SSID)
Communication
Mode
Infrastructure
For example:
Network Name (SSID)
HELLO
Authentication Encryption Mode
Method
LEAP CKIP
EAP-FAST/NONE AES
TKIP
EAP-FAST/MS- AES
CHAPv2
TKIP
EAP-FAST/GTC AES
TKIP
PEAP/MS-CHAPv2 AES
TKIP
PEAP/GTC AES
TKIP
EAP-TTLS/CHAP AES
TKIP
EAP-TTLS/MS- AES
CHAP
TKIP
EAP-TTLS/MS- AES
CHAPv2
TKIP
EAP-TTLS/PAP AES
TKIP
EAP-TLS AES
TKIP
User ID Password
-
-
95