Brother HL-L8260CDN Online User's Manual page 266
Hide thumbs
Also See for HL-L8260CDN:
- Technical reference manual (517 pages) ,
- Quick setup manual (2 pages) ,
- Quick setup manual (2 pages)
Table of Contents
Advertisement
Error Message
No Paper
No Paper Fed Tray1
No Paper Fed Tray2
No Paper Fed Tray3
No Paper Fed Tray4
No Paper MP
No Paper Tray1
No Paper Tray2
No Paper Tray3
No Paper Tray4
No Toner
No Tray1
No Tray2
No Tray3
No Tray4
No Waste Toner
Out of Memory
Paper Low
Paper Low Tray 1
Paper Low Tray 2
Paper Low Tray 3
Paper Low Tray 4
Print Data Full
Print Unable ##
Cause
The machine is out of paper, or
paper is not loaded correctly in the
paper tray.
The machine failed to feed paper
from the indicated paper tray.
The MP tray is out of paper, or
paper is not loaded correctly in the
MP tray.
The machine failed to feed paper
from the indicated paper tray.
The toner cartridge for the colour
indicated on the LCD is not
installed or not installed correctly.
The paper tray is not installed or
not installed correctly.
The waste toner box is not
installed or not installed correctly.
The machine's memory is full.
The paper tray is nearly empty.
The machine's memory is full.
The machine has a mechanical
problem.
Action
•
Refill paper in the paper tray. Make sure
the paper guides are set to the correct size.
•
If paper is in the tray, remove it and load it
again. Make sure the paper guides are set
to the correct size.
•
Do not overfill the paper tray.
Pull out the paper tray indicated on the LCD
and remove all jammed paper.
Do one of the following:
•
Refill paper in the MP tray. Make sure the
paper guides are set to the correct size.
•
If paper is in the tray, remove it and load it
again. Make sure the paper guides are set
to the correct size.
Do one of the following:
•
Refill paper in the paper tray indicated on
the LCD. Make sure the paper guides are
set to the correct size.
•
If paper is in the tray, remove it and load it
again. Make sure the paper guides are set
to the correct size.
•
Do not overfill the paper tray.
Remove the toner cartridge for the colour
indicated on the LCD from the drum unit, and
put the toner cartridge back into the drum unit.
If the problem continues, replace the toner
cartridge.
Reinstall the paper tray indicated on the LCD.
Reinstall the waste toner box.
Press
and reduce the print resolution.
Refill the paper in the paper tray indicated on
the LCD.
Press
and delete the previously stored
secure print data.
•
Press and hold
to turn the machine off,
wait a few minutes, and then turn it on
again.
•
If the problem continues, contact Brother
customer service.
261
Advertisement
Table of Contents
