Brother HL-L8260CDN Online User's Manual page 366

Level 2 Level 3
Setting Lock Set Password
On
New Passwd:XXXX
(Available only when
you enter the password
for the first time.)
Interface Select
Auto IF Time
Input Buffer
1 Available if the Lower Tray(s) is installed.
[Printer]
Level 2 Level 3
Emulation -
Quality -
Print Options Font List
Test Print
2-sided 2-sided Print
Single Image
Auto Continue -
Output Colour -
Paper Type -
Paper Size -
Copies -
Orientation
-
Print Position X Offset
Y Offset
Auto FF -
HP LaserJet Font No.
Font Pitch
Level 4 Description
- Restrict unauthorised users from changing the machine's
settings.
-
-
- Select the interface to use.
If you select the Auto option, the machine changes the
interface to USB or Network depending on which interface is
receiving data.
- Set the time-out period for the auto interface selection.
- Increase or decrease the input buffer capacity.
Level 4 Description
- Choose the emulation mode.
- Select the print quality.
HP LaserJet Print the font list and samples of HP LaserJet.
BR-Script 3 Print the font list and samples of BR-Script.
- Print the test page.
- Select whether to print on both sides of the paper.
- For a print job where the last page is a 1-sided
image, select the 1-sided Feed option to reduce
printing time.
When you use letterhead or preprinted paper, you
must select the 2-sided Feed option. If you select
1-sided Feed for letterhead or preprinted paper,
the last page will be printed on the reverse side.
- Select if you want the machine to clear paper size
errors or media type errors automatically, and use
paper from other trays.
- Set the output colour.
- Set the type of paper.
- Set the size of paper.
- Set the number of printed pages.
- Set pages to print in either portrait or landscape
orientation.
- Move the print start position (at the top-left corner of
pages) horizontally up to -500 (left) to +500 (right)
dots in 300 dpi.
- Move the print start position (at the top-left corner of
pages) vertically up to -500 (up) to +500 (down) dots
in 300 dpi.
- Allow the machine to print any remaining data
automatically.
- Set the font number.
- Set the font pitch.
361