Brother HL-L8260CDN Online User's Manual page 376

Level 3 Level 4
Colour Calibration
Correction
Registration
Auto Correction -
Colour Settings Setting Mode
[All Settings] > [Network]
Level 3 Level 4
Wired LAN TCP/IP
Ethernet
Wired Status
Level 5 Descriptions
Calibrate Initiate colour calibration to check and correct
colours.
Reset Reset the calibration parameters to the default
settings.
- Align the print position of each colour.
Set the machine to perform Colour Calibration and
Registration automatically.
Select whether to apply the colour print settings of
the machine or the printer driver.
Colour Mode Select the colour mode.
Improve Gray Turn on or off to improve the image quality of shaded
Color areas.
Enhance Black Turn on or off if a black graphic does not print
Printing correctly.
Brightness Adjust the brightness.
Contrast Adjust the contrast.
Red Adjust the red colour.
Green Adjust the green colour.
Blue Adjust the blue colour.
Level 5 Level 6
Boot Method -
IP Address -
Subnet Mask
-
Gateway -
Node Name -
WINS -
Configuration
WINS Server Primary
Secondary Specify the IP address of the secondary
DNS Server Primary
Secondary Specify the secondary DNS server's IP
IP Boot Tries -
APIPA -
IPv6 -
- -
- -
Descriptions
Choose the IP method that best suits
your needs.
Enter the IP address.
Enter the Subnet mask.
Enter the Gateway address.
Enter the Node name.
Select the WINS configuration mode.
Specify the IP address of the primary
WINS server.
WINS server.
Specify the primary DNS server's IP
address.
address.
Specify the number of attempts the
machine will try to obtain an IP address
when the Boot Method is set to any
setting except Static.
Allocate the IP address from the link-
local address range automatically
Enable or disable the IPv6 protocol.
Choose the Ethernet link mode.
Display the Ethernet link status.
1
.
371