Trip Priority Priority (Id=11800); Start Speed (Id=11803); Ignition Off Timeout (Id=11804); Trip Mode (Id=11802) - Teltonika FMB010 User Manual

6.7.29 Trip priority priority (ID=11800)

Defines priority of trip scenario:
0 – disabled, 1 – low, 2 – high, 3 – panic
Minimum Maximum
value value
0 3

6.7.30 Start Speed (ID=11803)

This parameter represents speed, which is detected as minimum speed to indicate TRIP
START and generate event.
Minimum Maximum
value value
0 255

6.7.31 Ignition Off Timeout (ID=11804)

This parameter represents timeout to wait if ignition is off in order to detect TRIP STOP and
generate event.
Minimum Maximum
value value
0 65535

6.7.32 Trip mode (ID=11802)

For this feature I/O ODOMETER must be enabled. If I/O ODOMETER is enabled, and mode
is set to Continuous (value 0), TRIP distance is going to be counted till the end of trip, if between
records mode is set, ODOMETER will count distance only between two records.
Minimum Maximum
value value
0 1
6.8

AutoGeofencing

6.8.1.1

AutoGeofencing priority (ID=20000)

Defines priority of trip scenario:
0 – disabled, 1 – low, 2 – high, 3 – panic
Minimum Maximum
value value
0 3
6.8.1.2

Activation Timeout (ID=20003)

Parameter represents AutoGeofencing activation timeout in seconds.
Minimum Maximum
value value
0 65535
Default value Goes with (depends on)
0
Recommended Goes with (depends on)
value
-
Recommended Goes with (depends on)
value
-
Recommended Goes with (depends on)
value
-
Recommended Goes with (depends on)
value
0
Recommended Goes with (depends on)
value
60
parameters
parameters
Trip (ID=11800)
parameters
Trip (ID=11800)
parameters
Trip (ID=11800)
parameters
parameters
AutoGeofencing priority
(ID=20000)
Value
type
U8
Value
type
U8
Value
type
U16
Value
type
U8
Value
type
U8
Value
type
U16
77