Chapter 2: Getting Started - AAXA Technologies P2-A User Manual

Getting Started
Plugging In the projector
1. The P2-A needs to be plugged in and charged for four hours before operation.
Powering ON the projector
1. Connect the power cord to the P2-A.
2. Connect the other end of the power cord into the wall power source.
3. Hold the power button
Powering OFF the projector
1. To turn off the projector, hold the power button
off the projector.
Connecting to WiFi
1. View page 6 for details.
for 3 seconds to start the projector.
Chapter 2
for 3 seconds. This will fully turn
5