Wacom Cintiq 15X Manual page 3

Precautions on handling the Cintiq 15X
Do not lift up the Cintiq 15X by holding the stand. It may damage the open-close mechanism of the stand.
When you lift up the Cintiq 15X, be sure to hold the main unit casing.
Do not put heavy articles on the Interactive Pen Display; this may damage the cover glass or stand.
Do not place heavy article on the Cintiq 15X cables. Near the cable connectors, do not apply heavy stress
on the cables or do not repeat bending the cables. It may damage the Cintiq 15X.
Do not connect or disconnect the DVI video cable or power cable while the Interactive Pen Display or
your computer is turned on; it may damage the LCD display or computer video card.
For use with DVI, do not use any graphics card that Cintiq 15X can not be used with. It may damage
the Cintiq 15X.
Do not disassemble the Cintiq 15X or pen. This may cause the device to malfunction. In this case,
Wacom shall have no responsibility to repair or replace the product.
Do not use or store the Cintiq 15X where:
- Temperature changes are severe (e.g., outdoors or inside a vehicle).
- The Cintiq 15X and pen are exposed to direct sunlight or heat from an appliance.
- The Cintiq 15X and pen are exposed to water or any other kind of liquid.
- Temperature or humidity exceeds the specifications.
Do not block the ventilation holes in the rear panel. It may overheat and damage the Cintiq 15X.
Do not use the Cintiq 15X in a dusty environment. It may damage the Cintiq 15X.
Do not scratch the cover glass of the Cintiq 15X. Avoid placing sharp objects on the glass surface. If the
pen tip becomes sharp or angular, it may damage the coating on the cover glass of the Interactive Pen
Display. Please replace the pen nib as necessary.
Do not use detergent to clean the cover glass of the Cintiq 15X—this may alter the surface friction and
deteriorate the handwriting feel.