Removing And Replacing The Lcd - Motorola A780 Service Manual

Disassembly

Removing and Replacing the LCD

G
G
22
This product contains static-sensitive devices. Use anti-static handling procedures
to prevent electrostatic discharge (ESD) and component damage.
1. Remove the battery cover, battery, SIM card, stylus, rear housing and the
transceiver board assembly as described in the procedures
The flexible printed cable (FPC) (flex) is easily damaged. Exercise extreme care when
handling.
2. Carefully work the flat end of the disassembly tool under the LCD flex
connector and remove the connector from the transceiver board. See Figure 8.
LCD Display
Figure 8. Disconnecting the LCD Flex Connector from the Transceiver Board
3. To replace, Insert the LCD flex connector squarely into its mating connector
on the transceiver board and press firmly until it snaps into place. Fold the
LCD over onto the transceiver board.
4. Replace the transceiver board, rear housing, SIM card, stylus, battery, and
battery cover as described in the procedures.
September 20, 2004
Flex Connector
A780
.
6809488A90