Pch-Io Configuration - Kontron mITX-SKL-H User Manual

Function Second level Sub-screen / Description
GMM Device Enable/disable SA GMM device
(B0:D4:F0)>
CRID Support> Enable/disable CRID control for Intel SIPP
Above 4GB Enable/disable above 4 GB memory mapped IO BIOS assignment
MMIO BIOS
Disabled automically if aperture size is set to 2048 MB.
Assignment>
X2APIC Opt Out> Enable/disable X2APIC_Opt_Out bit
Sky CAM Device Enable/disable SA SKY CAM device
(B0:D5:F0)>

9.2.3.2. PCH-IO Configuration

The PCH-IO Configuration setup menu provides sub-screens for IO functions. The following subscreen functions are
included in the menu:
 PCI Express Configuration
 SATA and RST Configuration
 USB Configuration
 Security Configuration
 HD Audio Configuration
 Serial IO Configuration
 ISH Configuration
 TraceHub Configuration Menu
 PCH Thermal Throttling Control
 SB Porting Configuration
 DCI Enable (HDCIEN)
 DCI Auto Detect Enable
 Debug Port Selection
 GNSS
 PCH LAN Controller
DeepSx Power Policies

 Lan Wake From DeepSx
 Wake On LAN
 SLP_LAN# Low on DC PowerOLE_k1_off
 K1 OFF
 Wake on WLAN and BT Enable
 Disable DSX ACPRESET PullDown
 CLKRUN# Logic
 Serial IRQ Mode
 Port 61h Bit-4 Emulation
 State After G3
 Port 80h Redirection
 Enhanced Port 80 h LPC Decoding
 Compatibility Revision ID
 PCH Cross Throttling
 Disable Energy Reporting
 Enable TCO Timer
 PCIe PLL SSC
 Unlock PCH P2SB
www.kontron.com
mITX-SKL-H – User Guide, Rev.1.1
// 82