Technical Specifications - Siemens SCALANCE X-000 Operating Instructions Manual

Technical specifications

Note
Note the article number in the technical specifications.
The following technical specifications apply to the following devices:
Device
SCALANCE X005
SCALANCE X005TS
Note
Unless mentioned otherwise, the technical specifications in the following table relate to the
SCALANCE X005 and SCALANCE X005TS.
Technical specifications
Attachment to Industrial Ethernet
Quantity
Design
Properties
Transmission rate
Permitted cable lengths (Ethernet)
0 ... 85 m
0 to 100 m
Electrical data
Power supply
Current consumption
Power loss at 24 VDC
Overvoltage protection at input
Permitted ambient conditions
SCALANCE X-000
Operating Instructions, 09/2016, C79000-G8976-C344-02
Article number
6GK5 005-0BA00-1AA3
6GK5 005-0BA00-1CA3
5
RJ-45 jack with MDI-X pinning
Half duplex / full duplex
10/100 Mbps
Alternative combinations per length range
Max. 85 m IE FC TP Marine/Trailing Cable with IE FC RJ45 Plug 180
•
Max. 75 m IE FC TP Marine/Trailing Cable + 10 m TP Cord via
•
IE FC RJ45 Outlet
Max. 100 m IE FC TP Standard Cable with IE FC RJ45 Plug 180
•
Max. 90 m IE FC TP Standard Cable + 10 m TP Cord via IE FC RJ45 Outlet
•
Rated voltage
Voltage range
Design
Typical
Typical
24 VDC
18 to 32 VDC Safe Extra Low Voltage (SELV)
2-terminal plug-in block
80 mA
2 W
PTC resettable fuse (0.5 A / 60 V)
7
33