On The Product - Siemens SCALANCE X-000 Operating Instructions Manual

1.2

On the product

What is possible?
The SCALANCE X-000 IE switches allow the cost-effective installation of small Industrial
Ethernet linear bus or star structures with switching functionality. The devices are designed
for installation in a cabinet.
Note
It is not possible to use a SCALANCE X-000 in a redundant ring because it does not support
redundancy.
Note
If devices are supplied over long 24 V power supply lines or networks, measures are
necessary to prevent interference by strong electromagnetic pulses on the supply lines.
These can result, for example, due to lightning or switching of large inductive loads.
One of the tests used to attest the immunity of these devices to electromagnetic interference
is the "surge immunity test" according to EN 61000-4-5. This test requires overvoltage
protection for the power supply lines. A suitable device is, for example, the Dehn Blitzductor
BVT AVD 24 V type no. 918 422 or a comparable protective element.
Manufacturer:
DEHN+SÖHNE GmbH+Co.KG Hans Dehn Str.1 Postfach 1640 D-92306 Neumarkt,
Germany
Components of the product
The following components are supplied with a SCALANCE X-000:
● IE switch SCALANCE X-000
● 2-terminal plug-in block (power supply)
● Product information
Accessories
Component
IE FC Stripping Tool
IE FC blade cassettes
IE FC TP standard cable GP
IE FC TP trailing cable
IE FC TP marine cable
IE FC TP trailing cable GP
IE FC TP flexible cable GP
IE FC RJ-45 Plug 180
SCALANCE X-000
Operating Instructions, 09/2016, C79000-G8976-C344-02
Packaging unit
1
1
1
1
1
1
1
1
Introduction
1.2 On the product
Article number
6GK1 901-1GA00
6GK1 901-1GB00
6XV1 840 2AH10
6XV1 840-3AH10
6XV1 840-4AH10
6XV1 870-2D
6XV1 870-2B
6GK1 901-1BB10-2AA0
7