Mounting; Safety Notices For Installation - Siemens SCALANCE X-000 Operating Instructions Manual

Mounting

4.1

Safety notices for installation

Safety notices
When installing the device, keep to the safety notices listed below.
If the device is installed in a cabinet, the inner temperature of the cabinet corresponds to
the ambient temperature of the device.
Safety notices on use in hazardous areas
General safety notices relating to protection against explosion
The device is suitable only for operation in the interior.
The device may only be operated in an environment with pollution degree 1 or 2 (see IEC
60664-1).
When used in hazardous environments corresponding to Class I, Division 2 or Class I,
Zone 2, the device must be installed in a cabinet or a suitable enclosure.
Safety notices for use according to ATEX and IECEx
If you use the device under ATEX or IECEx conditions you must also keep to the following
safety notices in addition to the general safety notices for protection against explosion:
SCALANCE X-000
Operating Instructions, 09/2016, C79000-G8976-C344-02
WARNING
WARNING
WARNING
WARNING
4
17