Machine Settings - Muratec MFX-3595 Field Engineering Manual

3.43.7 Modifying the session control time
Modify the session time between the machine and the OfficeBridge users here. The factory default is 30
minutes.
When there is no communication between the machine and the OfficeBridge user during this time, the user
will forcibly be log out.
The time can be set between 10 to 1440 minutes (24 hours).
1. Open the network service screen. (See page 3-130.)
2. Click [Session Control time].
3. Input the desired value and click [Save].

3.43.8 Machine settings

Asset Number
This mode is used to input the asset number. You can also input the asset number from the machine control
panel. (See page 3-123.)
1. Open the network service screen. (See page 3-130.)
2. Click [Machine Settings].
3. Input the asset number to "Asset Number" box and click [Save].
The asset number should be within 13 characters.
Guest User Name
This mode is used to edit the guest user name "GUEST".
1. Open the network service screen. (See page 3-130.)
2. Click [Machine Settings].
3. Input the new name for guest user to the "Guest User Name" box and click [Save].
The guest user name should be within 64 characters.
3-138