Sensor Pds/Swbs - Muratec MFX-3595 Field Engineering Manual

SENSOR PDS/SWBS

1. Remove the Exit assy. (See "EXIT ASSY" on page 5-63.)
2. Remove Sheet Exit Airflow [1].
3. Disconnect the connector [2].
4. Remove three screws [3], lift up the Guide upper exit [4] from the front and remove the Guide lower exit
[5].
[ 3 ]
5. Remove the Guide change exit [7] from the Guide lower exit [6].
[ 4 ]
[ 5 ]
[ 7 ]
5-64
[ 3 ]
[ 3 ]
[ 6 ]
[ 1 ]
[ 2 ]