Muratec MFX-3535 Quick Demo Manual

13. Change/edit a default "Soft Key"
a. From the My MFP default screen, select [Setting],
[Register], [Soft Key].
b. Select the mode which contains the soft key you wish to
change. For this demonstration select [Copy Functions].
c. Select the soft key you want to change/replace.
d. Select the function you want to assign to the soft key.
For this demo, select [Bypass].
e. Select [Enter], [Close], [Reset].
14. Changing features on "My MFP" Screen
a. From the My MFP default screen, select [Setting],
[Register], [My MFP Shortcut].
b. Select the soft key you want to change/replace.
c. Select the new function you want to assign to the soft
key. For this demo select [Paper Settings].
d. Select [Enter], [Reset].
15. Select the default copy and fax cassettes
a. From the My MFP default screen, select [Setting], [Paper
Settings], [Select Print Cass].
b. Select the cassette you want to edit. For the demo
select [Fax], [Bypass Tray].
c. Select [On]/[Off] to enable and disable Bypass Tray,
select [Enter].
16. Loading paper in the cassettes/
bypass tray
a. Pull out paper drawer, press cassette down until it
latches. Place paper on top of cassette, close drawer.
b. Unfold bypass tray, load paper as depicted.
Additional features/notes
Muratec America, Inc.
3301 East Plano Parkway, Suite 100, Plano, Texas 75074
(469) 429-3300 • www.muratec.com
MK3262
MFX-3535
Quick Demo GuiDe
This quick demo guide demonstrates the
popular MFX-3535 functions. Press [Reset] to
return to a default screen once you have finished
programming a function or to simply start over.
Select [Start] to initiate the job in all cases.
Visit and log in to the Muratec Webcenter
at www.muratec.com/webcenter for
additional information.