Table of Contents
Advertisement
The 1-Click-VPN Site-to-Site Wizard will be started. Enter a name for this
access and select the address under which the router is accessible from
the Internet.
Select whether connection establishment is to take place via the name or
IP address of the central router, or via an ISDN connection. Enter the
address or name of the central router, or its ISDN number.
The final step is to define how the networks are to intercommunicate:
The INTRANET at headquarters only is to be provided to the branch
offices.
All private networks at the branch offices can also be connected to
one another via headquarters.
All entries for the central device are made just once and are then
stored to the device properties.
5.4
Instructions for WEBconfig
In WEBconfig, VPN-based network connectivity cannot be set up in
the Wizard. The Expert Configuration has to be used instead. Refer to
the reference manual for information on this.
Carry out the configuration on both routers, one after the other.
In the main menu, launch the Wizard 'Connect two local area networks'.
Follow the Wizard's instructions and enter the necessary data.
LANCOM 9100 VPN
Chapter 5: Connecting two networks
43
Advertisement
Table of Contents
