Lanconfig Wizard; Webconfig Wizard - Lancom 9100 VPN Manual

Hide thumbs Also See for 9100 VPN:

Hello, I am your AI assistant. How can I help you?

Table of Contents

Along with these basic settings, you can use the Security settings Wizard to

check the settings of your wireless network (if so equipped).

8.2.1

LANconfig Wizard

Mark your LANCOM in the selection window. From the command line,

select Extras

In the selection menu, select the Setup Wizard, Check security settings

and confirm the selection with Next.

In the dialogs that follow you can set the password and select the proto-

cols to be available for accessing the configuration from local and remote

networks.

In a subsequent step, you can set parameters for locking the configuration

such as the number of incorrect password entries and the duration of the

lock.

For the firewall, you can activate stateful inspection, ping blocking, and

the stealth mode.

The Wizard will inform you as soon as the entries are complete. Close the

configuration with Finish.

8.2.2

With WEBconfig you have the option to launch the Check security settings

Wizard to check and change any settings. The following values are edited:

Device password

The protocols to be available for accessing the configuration from local

and remote networks

The parameters for locking the configuration (the number of incorrect

password entries and the duration of the lock)

Setup Wizard.

LANCOM 9100 VPN

Chapter 8: Security settings

Table of Contents

Do you have a question about the 9100 VPN and is the answer not in the manual?