Table of Contents
Advertisement
LANCOM 9100 VPN
Chapter 6: Providing dial- in access
When setting up the VPN access, certain settings are made to optimize ope-
rations with the LANCOM Advanced VPN Client, including:
6.5
Instructions for WEBconfig
50
Save profile as an import file for the LANCOM Advanced VPN Client
Send profile via e-mail
Print out profile
Sending a profile via e-mail could be a security risk should the e-mail
be intercepted en route!
To send the profile via e-mail, the device configuration must be set up
with an SMTP account with the necessary access data. Further, the
configuration computer requires an e-mail program that is set up as
the standard e-mail application and that can be used by other appli-
cations to send e-mails.
Gateway: If defined in the LANCOM VPN Router, a DynDNS name is used
here, or alternatively the IP address
FQDN: Combination of the name of the connection, a sequential number
and the internal domain in the LANCOM VPN Router.
Domain: If defined in the LANCOM VPN Router, the internal domain is
used here, or alternatively a a DynDNS name or IP address
VPN IP networks: All IP networks defined in the device as type 'Intranet'.
Preshared key: Randomly generated key 16 ASCII characters long.
Connection medium: The LAN is used to establish connections.
VoIP prioritization: VoIP prioritization is activated as standard.
Exchange mode: The exchange mode to be used is 'Aggressive Mode'.
IKE config mode: The IKE config mode is activated, the IP address infor-
mation for the LANCOM Advanced VPN Client is automatically assigned
by the LANCOM VPN Router.
In the main menu, launch the Wizard 'Provide remote access (RAS)'. Fol-
low the Wizard's instructions and enter the necessary data.
Configure the access account on the dial-in PC as described. Subsequently
test the connection (see box 'Ping – the quick test of a TCP/IP connec-
tion').
Advertisement
Table of Contents
