TP-Link Archer C55 User Manual page 22

Wireless Network Name - Also called the SSID (Service Set Identification). Enter a

value of up to 32 characters. The same name must be assigned to all wireless devices
in your network. The default SSID is set to be TP-LINK_XXXX. This value is
Security

Enable Security (WPA-PSK/WPA2-PSK) – It's selected by default, with the

default PSK password the same as the default PIN code.
Disable Wireless Security - The wireless security function can be enabled or

disabled. If disabled, the wireless stations will be able to connect the router without
encryption.
The above settings are only for basic wireless parameters. For advanced settings, please
check "More Advanced Wireless Settings", and then you can set the following parameters.
Band - This field displayed the operating frequency being configured.

Mode - This field determines the wireless mode which the router works on.

11bg mixed - Select if you are using both 802.11b and 802.11g wireless clients.

11bgn mixed - Select if you are using a mix of 802.11b, 11g, and 11n wireless

clients.
Archer C55 AC1200 Wireless Dual Band Gigabit Router
- 17 -