Wps - TP-Link Archer C55 User Manual

Password - If the AP your router is going to connect needs password, you need to fill

the password in this blank.
4.6.2

WPS

Choose menu "Wireless 2.4GHz →WPS", you can the screen as shown in the following figure.
This section will guide you to add a new wireless device to an existing network quickly by WPS
WPS - Enable or disable the WPS function here.

Current PIN - The current value of the router's PIN is displayed here. The default PIN of the

router can be found in the label or User Guide.
Restore PIN - Restore the PIN of the router to its default.

Generate New PIN - Click this button, and then you can get a new random value for the

router's PIN. You can ensure the network security by generating a new PIN.
Disable device PIN - If this box is checked, and then wireless clients will not be able to

connect to the wireless network with PIN code.
Add device - You can add a new device to the existing network manually by clicking this

button.
If the wireless adapter supports Wi-Fi Protected Setup (WPS), you can establish a wireless
connection between wireless adapter and router using either Push Button Configuration (PBC)
method or PIN method.

Note:
To build a successful connection by WPS, you should also do the corresponding configuration of
the new device for WPS function meanwhile.
I. Use the Wi-Fi Protected Setup Button
Use this method if your client device has a WPS button.
Archer C55 AC1200 Wireless Dual Band Gigabit Router
(Wi-Fi Protected Setup) function.
- 38 -