TP-Link Archer C55 User Manual page 11

Ethernet (1, 2, 3, 4): These ports (1, 2, 3, 4) connect the router to the local PC(s).

Internet: This port is where you will connect the DSL/cable Modem, or Ethernet.

Reset: Pressing this button for about 5 seconds enables the Reset function. With the router

powered on, press and hold the Reset button (approximately 5 seconds) until all LEDs are
lit. And then release the button and wait for the router to reboot to its factory default settings.
Power On/Off: The switch for the power.

Power: The Power socket is where you will connect the power adapter. Please use the

power adapter provided with this Archer C55 AC 1200 Wireless Dual Band Gigabit Router.
Wi-Fi On/Off: The button for the wireless function.

Wireless antennas: To receive and transmit the wireless data.

Archer C55 AC1200 Wireless Dual Band Gigabit Router
- 6 -