TP-Link Archer C55 User Manual page 47

Encryption - When WPA-PSK or WPA is set as the Authentication Type, you can select
•
either Automatic, or TKIP or AES as Encryption.

Note:
If you check the
find a notice in red as shown in the following figure.
Wireless Password - You can enter ASCII characters between 8 and 63 characters or 8 to
•
64 Hexadecimal characters. The default password is the same with the default PIN code,
which is labeled on the bottom of the router.
Group Key Update Period - Specify the group key update interval in seconds. The value
•
should be 30 or above. Enter 0 to disable the update.
WPA/WPA2- Enterprise - It's based on Radius Server.

Version - you can choose the version of the WPA security on the drop-down list. The
•
default setting is Automatic, which can select WPA (Wi-Fi Protected Access) or WPA2
(WPA version 2) automatically based on the wireless station's capability and request.
Encryption - You can select either Automatic, or TKIP or AES.
•

Note:
If you check the WPA/WPA2-Enterprise radio button and choose TKIP encryption, you will
find a notice in red as shown in the following figure.
Radius Server IP - Enter the IP address of the Radius server.
•
Radius Server Port - Enter the port number of the Radius server.
•
Radius Server Password - Enter the password for the Radius server.
•
Archer C55
WPA/WPA2-Personal
AC1200 Wireless Dual Band Gigabit Router
radio button and choose TKIP encryption, you will
- 42 -