TP-Link Archer C55 User Manual page 19

User Name/Password - Enter the User Name and Password provided by your ISP.

These fields are case-sensitive. If you have difficulty with this process, please contact
your ISP.
Confirm Password - Enter the password again to make sure that the password is

correct.
Secondary Connection - It's available only for PPPoE Connection. If your ISP provides an

extra Connection type such as Dynamic/Static IP to connect to a local area network, then you
can check the radio button of Dynamic/Static IP to activate this secondary connection.
Disabled - The Secondary Connection is disabled by default, so there is PPPoE

connection only. This is recommended.
Dynamic IP - You can check this radio button to use Dynamic IP as the secondary

connection to connect to the local area network provided by ISP.
Static IP - You can check this radio button to use Static IP as the secondary connection

to connect to the local area network provided by ISP.
4) If your connection type is L2TP, select L2TP and the next screen will appear as shown in
the following figure.Configure the following parameters and then click Next to continue.
Username/Password - Enter the Username and Password provided by your ISP.

These fields are case-sensitive. If you have difficulty with this process, please contact
your ISP.
Select Static IP if the IP Address/ Subnet Mask/ Gateway and DNS server address have
been provided by your ISP. Then please enter server IP address or domain name provided by
your ISP, and also enter the corresponding parameters.
Archer C55 AC1200 Wireless Dual Band Gigabit Router
- 14 -