Installing The Door And The Glass Panels; What To Do If - AEG BY9314001 User Manual

42 www.aeg.com
Installing the door and the
glass panels
When the cleaning is completed, install
the glass panels and the oven door. Do

13. WHAT TO DO IF...

The appliance does
not heat up.
The appliance does
not heat up.
The appliance does
not heat up.
The appliance does
not heat up.
The appliance does
not heat up.
The display shows
F111.
DeluxeAppliances - EUappliances.com
2
B
WARNING!
Refer to the Safety chapters.
Problem
The appliance is deactiva-
ted.
The clock is not set.
The necessary settings are
not set.
The Child Lock is activated. Refer to "Activating and
The fuse is released.
The CT Sensor plug is not
correctly installed into the
socket.
6.
7.
1
8.
9.
the above steps in the opposite se-
quence. Install the smaller panel first,
then the larger.
Possible cause
Hold the door trim (B) on the top
edge of the door at the two sides
and push inwards to release the clip
seal.
Pull the door trim to the front to re-
move it.
Hold the door glass panels on their
top edge one by one and pull them
up out of the guide.
Clean the glass panel with water
and soap. Dry the glass panel care-
fully.
Remedy
Activate the appliance.
Set the clock.
Check the settings.
deactivating the Child Lock
function".
Make sure that the fuse is
the cause of the malfunc-
tion. If the fuse releases
again and again, contact a
qualified electrician.
Put the plug of core tem-
perature sensor as far as
possible into the socket.