Clock Functions - AEG BY9314001 User Manual

14 www.aeg.com
– When the heating function or pro-

7. CLOCK FUNCTIONS

Symbol
If you set the time for a clock function,
the time starts to count down after 5 sec-
onds.
Setting the clock functions
1.
2.
3.
4.
DeluxeAppliances - EUappliances.com
gramme operates, the heating ele-
ments deactivate 10% earlier while
the lamp and fan continue to oper-
ate. For this feature to operate, the
cooking time must be longer than
30 minutes or you must use the
clock functions ( Duration , End
Time ).
Function
Minute Minder
Duration
End Time
If you use the clock functions Du-
ration and End Time , the appli-
ance deactivates the heating ele-
ments after 90 % of the set time.
The appliance uses the residual
heat to continue the cooking
procedure until the time ends.
The residual heat can stay in the
appliance from 3 to 20 minutes.
Set a heating function.
Press again and again until the
display shows the necessary clock
function and the related symbol.
Use the shuttle to set the necessary
time. Press OK to confirm. When the
time ends, an acoustic signal
sounds. The appliance deactivates.
The display shows a message.
Press a sensor field to stop the sig-
nal.
Useful information:
– When the appliance is deactivated,
you can use the heat to keep food
warm. The display shows the re-
maining temperature.
• Eco functions - refer to "Heating
Functions" (for select models only).
Description
To set a countdown (max. 2 h 30 min). This func-
tion has no effect on the operation of the appli-
ance. You can also activate it when the appliance
is deactivated. Press
Use the shuttle to set the minutes and OK to start.
To set the length of an operation (max. 23 h 59
min).
To set the switch-off time for a heating function
(max. 23 h 59 min).
• With Duration and End Time , you
must set the heating function and the
temperature first. Then you can set the
clock function. The appliance deacti-
vates automatically.
• You can use Duration and End Time at
the same time if you want to automati-
cally activate and deactivate the appli-
ance at a given time later.
• When you use the Core Temperature
Sensor (if applicable), the Duration
and End Time functions do not oper-
ate.
7.1 Heat + Hold
The Heat + Hold function keeps pre-
pared food warm at 80 °C for 30 mi-
nutes. It activates after the baking or
roasting procedure ends.
• You can activate or deactivate the
function in the Basic Settings menu.
• Conditions for the function:
– The set temperature is more than 80
°C.
– The function Duration is set.
to activate the function.