Power Connection - Mitsubishi Electric FT5000 Handbook

Ft series
Table of Contents

Advertisement

Legalities
This equipment complies with the relevant clauses of the following European Directives (and all subsequent amendments):
Low Voltage Directive
EMC Directive
Telecommunications Directive
CE Marking Directive
IMPORTANT
This system, when supplied, complies with the CE Marking Directive and its strict legal requirements. Use only parts tested
and approved by Mitsubishi Electric PC Division. All expansion cards, drives and peripherals should carry the CE mark.
Standards
Safety
This product complies with the European safety standard EN60950 which will, when applicable, include the national
deviations for the country in which it is sold.
Electro-magnetic Compatibility (EMC)
This product complies with the following European EMC standards:
Emissions EN50022 Class A
Immunity EN50082-1
This product also complies with the following International EMC standards:
VCCI
Notes
All interconnecting cables (for example, signal and communication cables) should be less than 2 metres in length. If cable
extensions are used, ensure adequate earth connections are provided and screened cables are used.
If any metal casework components are removed, during upgrade work for example, ensure that all metal parts are correctly
re-assembled and all internal and external screws are re-fitted and correctly tightened.

Power Connection

Typical AC plugs
250V
E
L
N
BS1363A
U. K.
Checking the AC power supply
When this product is delivered, it is ready for the commercial AC power supply generally available in the country in which
it is first sold. It has been set for the correct voltage range, and is supplied with an AC power cord and plug which comply
with the relevant safety standards.
Before using the product in a country other than that in which it was originally sold, you must check the voltage and
frequency of that country's AC power supply, and the type of power cord required there. Check the power rating labels on
the rear of the computer's system unit and its monitor to ensure that they are compatible with the AC power supply.
73/23/EEC
89/336/EEC
91/263/EEC
93/68/EEC
Class A
(Japan)
250V
E
N
L
SHUCO
Austria Belgium
Finland France
Italy Germany
Sweden Norway
Holland
S A F E T Y & R E G U L A T O R Y N O T I C E S
125V
E
N
L
NEMA 5-15P
SRAF 1962/DB16/87
Taiwan
Thailand
Japan
USA
Canada
250V
N
L
E
ASE 1011
Denmark
Switzerland
FT5000 HANDBOOK
250V
iii

Advertisement

Table of Contents
loading

Table of Contents