Table of Contents
Advertisement
C o n f i g u r a t i o n a n d s o f t w a r e u t i l i t i e s
System resource usage
Click <Resource Use> in the Configuration window to display the System Resource Usage
window, which shows the resources each device consumes. This information is useful if a conflict
occurs. Devices can be organised according to the resources you want to examine using the
options in the Resource section of the screen. The resource information can also be written to a
plain text file through this window.
Multiboot options add-in
In this window, you can change the boot priority of a device.
1.
Select a device
2.
Press <+> to move the device up in the list (higher priority). Press <-> to move it down.
Security add-in
In this window, you can set the User and Administrator passwords and security options.
To set the user password
1.
Click <User Password>.
2.
Enter the password in the first field.
3.
Confirm the password by entering it again in the second field.
To change or clear the user password
1.
Click <User Password>.
2.
Enter the old password in the first field.
3.
Enter the new password in the second field (or leave blank to clear).
4.
Confirm the password by entering it again in the second field (or leave blank to clear).
To set the administrator password
1.
Click <Administrator Password>.
2.
Enter the password in the first field.
3.
Confirm the password by entering it again in the second field.
To change or clear the administrator password
1.
Click <Administrator Password>.
2.
Enter the old password in the first field.
3.
Enter the new password in the second field (or leave blank to clear).
4.
Confirm the password by entering it again in the second field (or leave blank to clear).
Security options
In this window, you can set the other security options:
Hot Key—sets a key sequence that puts the server into secure mode when the key is pressed.
Lock-Out Timer—sets an interval that puts the server into secure mode when no activity
occurs during the interval.
Secure Boot Mode—forces the server to boot directly into secure mode.
Video Blanking—turns off the video when the server is in secure mode.
Floppy Write—controls access to the diskette drive when the server is in secure mode.
Reset/Power Switch Locking—controls the power and reset buttons when the server is in
secure mode.
7/18
FT5000 HANDBOOK
Advertisement
Table of Contents
