Table of Contents
Advertisement
C o n f i g u r a t i o n a n d s o f t w a r e u t i l i t i e s
Feature
System Backup Reminder
Virus Check Reminder
Secure Mode Timer
Secure Mode Hot Key
(Ctrl-Alt- )
Secure Mode Boot
Video Blanking
Floppy Write Protect
Server menu
Feature
System Management
Console Redirection
Processor Retest
System management submenu
Feature
Server Management Mode
System Event Logging
Clear Event Log
Assert NMI on AERR
Assert NMI on BERR
Assert NMI on PERR
Assert NMI on SERR
Enabled Host Bus Error
7/10
FT5000 HANDBOOK
Choices
Description
Disabled
Displays system-backup reminder message at boot.
Daily
Weekly
Monthly
Disabled
Displays virus-check reminder message at boot.
Daily
Weekly
Monthly
Disabled
Period of keyboard or PS/2 mouse inactivity specified for secure mode
1, 2, 5, 10,
to activate. A password is required for secure mode to function.
or 20 min
Cannot be enabled unless at least one password is enabled.
1 or 2 hr
[ ]
Key assigned to invoke the secure mode feature. Cannot be enabled
[A, B, ..., Z]
unless at least one password is enabled. Can be disabled by entering a
[0-9]
new key followed by a backspace or by entering <Delete>.
Disabled
System boots in secure mode. The user must enter a password to
unlock the system. Cannot be enabled unless at least one password is
Enabled
enabled.
Disabled
Blank video when secure mode is activated. The user must enter a
Enabled
password to unlock the system. Cannot be enabled unless at least one
password is enabled.
Disabled
When secure mode is activated, the diskette drive is write protected.
Enabled
The user must enter a password to re-enable diskette writes. Cannot
be enabled unless at least one password is enabled.
Choices
Description
N/A
Enters submenu.
N/A
Enters submenu.
No
Instructs BIOS to clear historical processor status and to retest all
Yes
processors on next boot.
Choices
Description
Disabled
Enabled loads Server Management Interrupt handler, which handles
Enabled
system errors.
Disabled
Enabled forces BIOS and BMC to log system events.
Enabled
Disabled
Enabled clears the system event log.
Enabled
Disabled
Enabled generates a nonmaskable interrupt (NMI) on an address
Enabled
parity error (AERR).
Disabled
Enabled generates an NMI on a bus error (BERR).
Enabled
Disabled
Enabled generates an NMI on a parity error (PERR). To activate this
Enabled
feature, the system error (SERR) option must be enabled.
Disabled
Enabled generates an NMI on SERR.
Enabled
Disabled
Enables host single-bit errors (SBEs) and multiple-bit errors (MBEs).
Enabled
Advertisement
Table of Contents
