Table of Contents
Advertisement
EMP Access Modes: Choose either disabled, pre-boot, or always active, depending on the type of
EMP access needed.
EMP Restricted Mode Access: Set restricted mode to either enabled or disabled. In enabled
mode, the EMP console's server control options, Power On/Off and Reset, are NOT available. In
disabled mode, these options ARE available.
EMP Direct Connect/Modem Mode: Select Direct Connect if a null modem serial cable directly
connects the server's COM2 port to the EMP console client machine. If they are connected via a
modem, select Modem Mode.
Console redirection submenu
To use the EMP, you must set the following options exactly as noted.
COM Port Address:
IRQ# setting is automatically assigned with the correct number based on the COM port address
choice.
Baud Rate: Select 19.2k.
Console Type: Choose PC ANSI.
Flow Control: Choose CTS/RTS + CD.
Main EMP console window
The main EMP console window provides a graphical user interface (GUI) to access server control
operations and to launch the management plug-ins. A menu and tool bar at the top of the GUI
provide options to initiate plug-ins and other support features. A status bar at the bottom displays
connection information like server name, line status, and mode.
Toolbar
The tool bar buttons combine server control and management plug-in options available from the
Connect and Action Menus.
Select 2F8. This is the COM2 port that the EMP must use. The
Connects to a selected server.
Disconnects from the currently connected server.
Powers the selected server on or off.
Resets the selected server.
Opens the SEL viewer.
Opens the SDR viewer.
Opens the FRU viewer.
Opens the phonebook.
Opens online help.
C o n f i g u r a t i o n s o f t w a r e a n d u t i l i t i e s
FT5000 HANDBOOK
7/25
Advertisement
Table of Contents
