Detachable Armrest / Mudguard; Swiveling Legrests - Invacare XLT User Manual

Fitting
1. Insert the siderest from above into the holder on the back.
2. Fold it downwards.
Adjusting the height
1. Tip the lever A on the front of the support and move the armrest
upwards or downwards until you reach the desired height.
2. Engage the lever.
3. Perform the setting on both sides.
CAUTION!
This siderest does not engage into the wheelchair.
– Therefore do not hold it in order to lift the wheelchair.

3.6 Detachable armrest / mudguard

A
WARNING!
Risk of injury
The armrests are not locked and can be easily pulled out
upwards.
– Do not lift or transfer the wheelchair using the
armrests.
– Do not use the armrests for transportation when
carrying the wheelchair up- or downstairs.
Removing
1. Pull the armrests by the arm cushion out of the holder.
2. To adjust how easy or difficult it is to pull the armrests out of the
holder, change the degree to which the screws A are tightened.
Fitting
1. Push the armrests into the holder.
The mudguard has to be removed and fitted in the same way.
1512799-A

3.7 Swiveling legrests

Fixed
Angle
adjustable
2
Attaching
CAUTION!
Risk of trapping your fingers
– Be careful not to trap your fingers between frame and
legrest.
1. Push the tubes at the upper part of the legrests down into the
tubes on the wheelchair. Angle the legrests outwards when
inserting them.
2. Lock the legrests by turning them inwards.
The legrests are automatically locked so there is no risk of
them coming off the wheelchair.
Removing
Activate the release lever respectively the button A.
1.
2. Pull the leg rest upwards.
Swiveling
1. Activate the release lever respectively the button A.
2. Swivel the leg rests to the outside.
Swiveling forwards
1. Swivel the leg rest forwards until it engages.
Components and their functions
1
2
1
A
A
9