12.6 Adjusting the depth and angle
adjustable footplates
●○○
Difficulty:
Angle and the depth adjustment
1.
Loosen the screw A at the footplate attachment.
2.
Adjust the footplate to the correct position and retighten the
screw.
IMPORTANT!
– Do not place anything on the footplate when the
screws have been loosened.
12.7 Adjusting the one-piece footrest
A
●○○
Difficulty:
Angle adjustment
Loosen the four screws A at the footplate attachment.
1.
2.
Adjust the footplate to the correct position and retighten the
screw.
The footrest can be flipped up. Lift the right side of the
footrest upwards.
CAUTION!
– Be careful not to trap your fingers between the
footrest and the receiver when you fold down the
footrest.
1512799-A
A
Tools: 5 mm Allen key
Tools: 4 mm Allen key / 10
mm fixed spanner
12.8 Adjusting one-piece footrests (XLT
Swing)
●○○
Difficulty:
Angle adjustment
Loosen the two screws A at the footplate attachment.
1.
2.
Adjust the footplate to the correct position and retighten the
screw.
The footrest can be flipped up. Lift the right side of the
footrest upwards.
CAUTION!
– Be careful not to trap your fingers between the
footrest and the receiver when you fold down the
footrest.
12.9 Adjusting the seat
Seat depth adjustment
1.
Lift up the front part, slide into required depth.
Service
A
Tools: 5 mm Allen key
47